PLL-LNBs

 

n       Has wide frequency ranges.

n       Available with the LO stability +/- 150, +/- 100 kHz, +/- 25 or +/- 10 kHz over the temperature.

n       PLL has very low and optimized LO Phase Noise for all models ensure the lowest possible BER (Bit Error Rate).

n       Available with F- or N-connector.

n       Low noise figure over the entire band.

n       Options: Customized gain and variation, RF-Shielding, Sep. DC power input, Specified LO (Customized) and extended frequency range.

 

 

Specification PLL 9.75 GHz

Input frequency

10.7-11.8 GHz

LO

9.75 GHz

LO stability over temp.

+/- 150, +/- 100, +/- 25 or +/- 10 kHz

Output frequency

950 - 2050 MHz

General Specification

See below

 

Specification PLL 10.0 GHz

Input frequency

10.95-12.1 GHz

LO

10.0 GHz

LO stability over temp.

+/- 150, +/- 100, +/- 25 or +/- 10 kHz

Output frequency

950 - 2100 MHz

General Specification

See below

Specification PLL 10.25 GHz

Input frequency

11.2-11.7 GHz

LO

10.25 GHz

LO stability over temp.

+/- 25 or +/- 10 kHz

Output frequency

950 - 1450 MHz

General Specification

See below

 

Specification PLL 10.75 GHz

Input frequency

11.75-12.75 GHz

LO

10.75 GHz

LO stability over temp.

+/- 150, +/- 100, +/- 25 or +/- 10 kHz

Output frequency

950 - 2000 MHz

General Specification

See below

 

Specification PLL 11.3 GHz

Input frequency

12.25-12.75 GHz

LO

11.3 GHz

LO stability over temp.

+/- 150, +/- 100, +/- 25 or +/- 10 kHz

Output frequency

950 - 1450 MHz

General Specification

See below

 

General Specification PLL

Gain

52 dB

Gain variation within band

+/- 4 dB

Gain variation within 30 MHz

+/- 0.4 dB

Noise figure

0.8 dB typ.

LO Phase Noise typ

-70 dBc @ 1 kHz
-85 dBc @ 5 kHz
-90 dBc @ 10 kHz
-110 dBc @ 100kHz
-120 dBc @ >1 MHz

LO radiation

-60 dBm max

Image rejection

40 dB min

1 dB gain compression point

+5 dBm

Input

WR-75 waveguide

Output

F-75 ohm or N-connector 50 ohm

Output VSWR

2.1:1 max

DC power

12-24 V, 250 mA max

Operating temperature

-30 to +60C (-30 to +70C LO Stab. +/- 10 kHz)

Dimension

139 x 58 x 50 mm

Weight

510 g (F), 530 g (N)

Options

         LO Stability +/- 10 kHz over temp. -10 to +70C

         Customized Gain

         RF-Shielding

         Sep. DC power input

         Specified LO Min. 50-100 pcs

 

External 10 MHz Reference PLL-LNB

n       PLL ext. 10 MHz ref. has wide frequency ranges.

n       PLL ext. 10 MHz ref. has very low and optimized LO Phase Noise for all models ensure the lowest possible BER (Bit Error Rate).

n       PLL ext. 10 MHz ref. is available with F- or N-connector.

n       PLL ext. 10 MHz ref. has low noise figure over the entire band.

n       PLL ext. 10 MHz ref. Options: 10 MHz ref. via separate connector, Sep. DC power input, Customized gain and variation, RF-Shielding, Specified LO (Customized), extended frequency range and SMA-input.

 

Specification PLL 9.75 GHz ext. 10 MHz ref.

Input frequency

10.7-11.8 GHz

LO

9.75 GHz

Output frequency

950 2050 MHz

General Specification

See below

 

Specification PLL 10.0 GHz ext. 10 MHz ref.

Input frequency

10.95-12.1 GHz

LO

10.0 GHz

Output frequency

950 - 2100 MHz

General Specification

See below

 

Specification PLL 10.25 GHz ext. 10 MHz ref.

Input frequency

11.2-11.7 GHz

LO

10.25 GHz

Output frequency

950 1450 MHz

General Specification

See below

 

Specification PLL 10.75 GHz ext. 10 MHz ref.

Input frequency

11.75-12.75 GHz

LO

10.75 GHz

Output frequency

950 2000 MHz

General Specification

See below

 

Specification PLL 11.3 GHz ext. 10 MHz ref.

Input frequency

12.25-12.75 GHz

LO

11.3 GHz

Output frequency

950 1450 MHz

General Specification

See below

 

General Specification PLL ext. 10 MHz ref.

LO Stability (over temp.)

Depends on external reference

External reference input frequency

10 MHz

Gain typ.

52 dB

Gain variation within 30 MHz

+/- 0.4 dB

Gain variation within band

+/- 4 dB

Noise figure typical

0.8 dB

LO Phase Noise typ.

-74 dBc @ 1 kHz
-80 dBc @ 5 kHz
-85 dBc @ 10 kHz
-110 dBc @ 100kHz

External Reference Phase noise

-135 dBc @ 100 Hz
-143 dBc @ 1 kHz
-145 dBc @ 10 kHz

LO radiation

-60 dBm max

Image rejection

40 dB min

1 dB gain compression point

+5 dBm

Input

WR-75 waveguide (R120)

External reference input power

-10 to 0 dBm

External reference input port

Output IF connector. Option: Sep. connector

Output (waterproof)

F-75 ohm or N-connector 50 ohm

Output VSWR

2.1:1 max

DC power

12-24 V, 250 mA max

Operating temperature

-30 to +60C (-30 to +70C LO Stab. +/- 10 kHz)

Dimension

134 x 58 x 50 mm (with N 139 x 58 x 50 mm)

Weight

510 g (F), 530 g (N)

Options

         10 MHz ref. via separate connector

         Sep. DC power input

         Customized gain and variation

         RF-Shielding

         Specified LO Min. 50-100 pcs

         SMA-input

         Extended frequency range e.g. LO 11.3 12.25-13.25 GHz

 

Twin Digital / Twin PLL

 

n       Twin Digital / Twin PLL has two output connectors (Vertical- & Horizontal Polarizations).

n       Twin Digital / Twin PLL is available with F- or N connectors.

n       Twin Digital / Twin PLL has extremely Low Phase Noise from 1 kHz and higher.

n       Twin Digital / Twin PLL has High Cross polarization.

n       Twin Digital / Twin PLL has 2 Year Warranty.

 

Twin Digital / Twin PLL in various LOs

Specification Twin Digital / Twin PLL LO 9.75

Input frequency

10.7-11.8 GHz

LO Frequency

9.75 GHz

Output Frequency

950-2050 MHz

Noise Figure

0.9 dB typ

Gain

53 +/- 3 dB

Gain variation

+/- 0.3 dB within 30 MHz

LO stability (over temp.)

+/- 3MHz

LO Phase Noise typ

-75 dBc @ 1 kHz
-85 dBc @ 1 kHz
-95 dBc @ 10 kHz
-110 dBc @ 100 kHz
-115 dBc @ >1MHz

Input

Circular waveguide 18 mm

Cross polarization

31.5 dB min.

LO radiation

-60 dBm max

Image rejection

50 dB min

1 dB gain compression point

+5 dBm

DC power

12-24 V / 110 mA typ on each polarization

Operating temperature

-30 to +60C

Output connectors

F-connectors 75 ohm or N-connectors 50 ohm

Output SWR

2:1 max

Dimensions

154 x 76 x 206 mm

Weight

1675 g (F), 1750 g (N)

Options

         High LO stability, +/- 1 MHz (over temp.)

         High LO stability, +/- 1.5 MHz (over temp.)

         High LO stability, +/- 2 MHz (over temp.)

         Low gain

         Low Output VSWR 1.55:1

         Offset LO frequency 9.75-12.5 GHz

         RF-shielding

         PLL-LNBs instead of LNB Digital, see spec. of PLL-LNBs

 

Specification Twin Digital / Twin PLL LO 10.0

Input frequency

10.95-12.1 GHz

LO Frequency

10.0 GHz

Output Frequency

950-2100 MHz

Noise Figure

0.9 dB typ

Gain

53 +/- 3 dB

Gain variation

+/- 0.3 dB within 30 MHz

LO stability (over temp.)

+/- 3MHz

LO Phase Noise typ

-75 dBc @ 1 kHz
-85 dBc @ 1 kHz
-95 dBc @ 10 kHz
-110 dBc @ 100 kHz
-115 dBc @ >1MHz

Input

Circular waveguide 18 mm

Cross polarization

31.5 dB min.

LO radiation

-60 dBm max

Image rejection

50 dB min

1 dB gain compression point

+5 dBm

DC power

12-24 V / 110 mA typ on each polarization

Operating temperature

-30 to +60C

Output connectors

F-connectors 75 ohm or N-connectors 50 ohm

Output SWR

2:1 max

Dimensions

154 x 76 x 206 mm

Weight

1675 g (F), 1750 g (N)

Options

         High LO stability, +/- 1 MHz (over temp.)

         High LO stability, +/- 1.5 MHz (over temp.)

         High LO stability, +/- 2 MHz (over temp.)

         Low gain

         Low Output VSWR 1.55:1

         Offset LO frequency 9.75-12.5 GHz

         RF-shielding

         PLL-LNBs instead of LNB Digital, see spec. of PLL-LNBs

 

Specification Twin Digital LO 10.05

Input frequency

11.0-12.1 GHz

LO Frequency

10.05 GHz

Output Frequency

950-2050 MHz

Noise Figure

0.9 dB typ

Gain

53 +/- 3 dB

Gain variation

+/- 0.3 dB within 30 MHz

LO stability (over temp.)

+/- 3MHz

LO Phase Noise typ

-75 dBc @ 1 kHz
-85 dBc @ 1 kHz
-95 dBc @ 10 kHz
-110 dBc @ 100 kHz
-115 dBc @ >1MHz

Input

Circular waveguide 18 mm

Cross polarization

31.5 dB min.

LO radiation

-60 dBm max

Image rejection

50 dB min

1 dB gain compression point

+5 dBm

DC power

12-24 V / 110 mA typ on each polarization

Operating temperature

-30 to +60C

Output connectors

F-connectors 75 ohm or N-connectors 50 ohm

Output SWR

2:1 max

Dimensions

154 x 76 x 206 mm

Weight

1675 g (F), 1750 g (N)

Options

         High LO stability, +/- 1 MHz (over temp.)

         High LO stability, +/- 1.5 MHz (over temp.)

         High LO stability, +/- 2 MHz (over temp.)

         Low gain

         Low Output VSWR 1.55:1

         Offset LO frequency 9.75-12.5 GHz

         RF-shielding

 

Specification Twin Digital LO 10.6

Input frequency

11.7-12.75 GHz

LO Frequency

10.6 GHz

Output Frequency

1150-2150 MHz

Noise Figure

0.9 dB typ

Gain

53 +/- 3 dB

Gain variation

+/- 0.3 dB within 30 MHz

LO stability (over temp.)

+/- 3MHz

LO Phase Noise typ

-75 dBc @ 1 kHz
-85 dBc @ 1 kHz
-95 dBc @ 10 kHz
-110 dBc @ 100 kHz
-115 dBc @ >1MHz

Input

Circular waveguide 18 mm

Cross polarization

31.5 dB min.

LO radiation

-60 dBm max

Image rejection

50 dB min

1 dB gain compression point

+5 dBm

DC power

12-24 V / 110 mA typ on each polarization

Operating temperature

-30 to +60C

Output connectors

F-connectors 75 ohm or N-connectors 50 ohm

Output SWR

2:1 max

Dimensions

154 x 76 x 206 mm

Weight

1675 g (F), 1750 g (N)

Options

         High LO stability, +/- 1 MHz (over temp.)

         High LO stability, +/- 1.5 MHz (over temp.)

         High LO stability, +/- 2 MHz (over temp.)

         Low gain

         Low Output VSWR 1.55:1

         Offset LO frequency 9.75-12.5 GHz

         RF-shielding

 

Specification Twin Digital / Twin PLL LO 10.75

Input frequency

11.7-12.75 GHz

LO Frequency

10.75 GHz

Output Frequency

950-2000 MHz

Noise Figure

0.9 dB typ

Gain

53 +/- 3 dB

Gain variation

+/- 0.3 dB within 30 MHz

LO stability (over temp.)

+/- 3MHz

LO Phase Noise typ

-75 dBc @ 1 kHz
-85 dBc @ 1 kHz
-95 dBc @ 10 kHz
-110 dBc @ 100 kHz
-115 dBc @ >1MHz

Input

Circular waveguide 18 mm

Cross polarization

31.5 dB min.

LO radiation

-60 dBm max

Image rejection

50 dB min

1 dB gain compression point

+5 dBm

DC power

12-24 V / 110 mA typ on each polarization

Operating temperature

-30 to +60C

Output connectors

F-connectors 75 ohm or N-connectors 50 ohm

Output SWR

2:1 max

Dimensions

154 x 76 x 206 mm

Weight

1675 g (F), 1750 g (N)

Options

         High LO stability, +/- 1 MHz (over temp.)

         High LO stability, +/- 1.5 MHz (over temp.)

         High LO stability, +/- 2 MHz (over temp.)

         Low gain

         Low Output VSWR 1.55:1

         Offset LO frequency 9.75-12.5 GHz

         RF-shielding

         PLL-LNBs instead of LNB Digital, see spec. of PLL-LNBs

 

Specification Twin Digital LO 11.2

Input frequency

12.2-12.75 GHz

LO Frequency

11.2 GHz

Output Frequency

1000-1550 MHz

Noise Figure

0.9 dB typ

Gain

53 +/- 3 dB

Gain variation

+/- 0.3 dB within 30 MHz

LO stability (over temp.)

+/- 3MHz

LO Phase Noise typ

-75 dBc @ 1 kHz
-85 dBc @ 1 kHz
-95 dBc @ 10 kHz
-110 dBc @ 100 kHz
-115 dBc @ >1MHz

Input

Circular waveguide 18 mm

Cross polarization

31.5 dB min.

LO radiation

-60 dBm max

Image rejection

50 dB min

1 dB gain compression point

+5 dBm

DC power

12-24 V / 110 mA typ on each polarization

Operating temperature

-30 to +60C

Output connectors

F-connectors 75 ohm or N-connectors 50 ohm

Output SWR

2:1 max

Dimensions

154 x 76 x 206 mm

Weight

1675 g (F), 1750 g (N)

Options

         High LO stability, +/- 1 MHz (over temp.)

         High LO stability, +/- 1.5 MHz (over temp.)

         High LO stability, +/- 2 MHz (over temp.)

         Low gain

         Low Output VSWR 1.55:1

         Offset LO frequency 9.75-12.5 GHz

         RF-shielding

 

Specification Twin Digital LO 11.25

Input frequency

12.2-12.75 GHz

LO Frequency

11.25 GHz

Output Frequency

950-1500 MHz

Noise Figure

0.9 dB typ

Gain

53 +/- 3 dB

Gain variation

+/- 0.3 dB within 30 MHz

LO stability (over temp.)

+/- 3MHz

LO Phase Noise typ

-75 dBc @ 1 kHz
-85 dBc @ 1 kHz
-95 dBc @ 10 kHz
-110 dBc @ 100 kHz
-115 dBc @ >1MHz

Input

Circular waveguide 18 mm

Cross polarization

31.5 dB min.

LO radiation

-60 dBm max

Image rejection

50 dB min

1 dB gain compression point

+5 dBm

DC power

12-24 V / 110 mA typ on each polarization

Operating temperature

-30 to +60C

Output connectors

F-connectors 75 ohm or N-connectors 50 ohm

Output SWR

2:1 max

Dimensions

154 x 76 x 206 mm

Weight

1675 g (F), 1750 g (N)

Options

         High LO stability, +/- 1 MHz (over temp.)

         High LO stability, +/- 1.5 MHz (over temp.)

         High LO stability, +/- 2 MHz (over temp.)

         Low gain

         Low Output VSWR 1.55:1

         Offset LO frequency 9.75-12.5 GHz

         RF-shielding

 

Specification Twin Digital / Twin PLL LO 11.3

Input frequency

12.25-12.75 GHz

LO Frequency

11.3 GHz

Output Frequency

950-1450 MHz

Noise Figure

0.9 dB typ

Gain

53 +/- 3 dB

Gain variation

+/- 0.3 dB within 30 MHz

LO stability (over temp.)

+/- 3MHz

LO Phase Noise typ

-75 dBc @ 1 kHz
-85 dBc @ 1 kHz
-95 dBc @ 10 kHz
-110 dBc @ 100 kHz
-115 dBc @ >1MHz

Input

Circular waveguide 18 mm

Cross polarization

31.5 dB min.

LO radiation

-60 dBm max

Image rejection

50 dB min

1 dB gain compression point

+5 dBm

DC power

12-24 V / 110 mA typ on each polarization

Operating temperature

-30 to +60C

Output connectors

F-connectors 75 ohm or N-connectors 50 ohm

Output SWR

2:1 max

Dimensions

154 x 76 x 206 mm

Weight

1675 g (F), 1750 g (N)

Options

         High LO stability, +/- 1 MHz (over temp.)

         High LO stability, +/- 1.5 MHz (over temp.)

         High LO stability, +/- 2 MHz (over temp.)

         Low gain

         Low Output VSWR 1.55:1

         Offset LO frequency 9.75-12.5 GHz

         RF-shielding

         PLL-LNBs instead of LNB Digital, see spec. of PLL-LNBs

 

Specification Twin Digital LO 11.475

Input frequency

12.5-12.75 GHz

LO Frequency

11.475 GHz

Output Frequency

1025-1275 MHz

Noise Figure

0.9 dB typ

Gain

53 +/- 3 dB

Gain variation

+/- 0.3 dB within 30 MHz

LO stability (over temp.)

+/- 3MHz

LO Phase Noise typ

-75 dBc @ 1 kHz
-85 dBc @ 1 kHz
-95 dBc @ 10 kHz
110 dBc @ 100 kHz
115 dBc @ >1MHz

Input

Circular waveguide 18 mm

Cross polarization

31.5 dB min.

LO radiation

-60 dBm max

Image rejection

50 dB min

1 dB gain compression point

+5 dBm

DC power

12-24 V / 110 mA typ on each polarization

Operating temperature

-30 to +60C

Output connectors

F-connectors 75 ohm or N-connectors 50 ohm

Output SWR

2:1 max

Dimensions

154 x 76 x 206 mm

Weight

1675 g (F), 1750 g (N)

Options

         High LO stability, +/- 1 MHz (over temp.)

         High LO stability, +/- 1.5 MHz (over temp.)

         High LO stability, +/- 2 MHz (over temp.)

         Low gain

         Low Output VSWR 1.55:1

         Offset LO frequency 9.75-12.5 GHz

         RF-shielding

 

Back